Ask a question?
If you wish to ask a question then please go to our FAQ page. You can then read
previous questions and answers.
If you wish to ask a question please contact us using:
Implements Gembus
4 links of 100 Gemstarts Each
Supports any Gemstart using Gembus
Modbus TCP/IP
Want to download some useful documents?
The GembusHub uses data to manage configuration and also provides a large amount of data to be read by a
PLC or DCS system, or any other Modbus TCP/IP client.
This is detailed in the Modbus data map, which can be downloaded here:
Modbus Data Map Rev 005
The GembusHub product manual is available here:
Apstar GembusHub Manual Rev 001
The GembusHub product datasheet is available for download here:
Apstar GembusHub Datasheet
To get an overview on the Modbus implementation used in GembusHub, then go to this page:
Modbus Overview
Help on getting started is available for download here:
Apstar GembusHub Getting Started
PC USB Driver files
To use the USB port on a computer it is required to install a device driver. This takes the form of a
*.inf file. When first connecting the GembusHub to a USB port on your PC, you will need to supply the
appropriate .inf file. The files for Windows XP, 7, 8 are contained in a zip file which you can download
here:
Windows drivers
GembusHubView Installer (Version for test and evaluation)
The GembusHubView is available here:
GembusHub install Version 1.0.5.0 (22/02/2024)
Please note that any of the resources listed above are subject to change without notice.